INSTRUCTIONS FOR: AXLE NUT SOCKET FOR IVECO - 110mm H36 DRIVE Item No:F2002

INSTRUCTIONS FOR: AXLE NUT SOCKET FOR IVECO - 110mm H36 DRIVE Item No:F2002

Summary

INSTRUCTIONS FOR: AXLE NUT SOCKET FOR IVECO - 110mm H36 DRIVE,source of axle nut socket truck repair tool

SAFETY INSTRUCTIONS
■ WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
× DO NOT use tool if damaged.
√ Ensure that a vehicle which has been jacked up is adequately supported with axle stands and that the wheels are chocked,refer to the vehicle manufacturer’s service instructions, or aproprietary manual.
√ Wear approved eye protection. A full range of personal safety equipment is available from your DNT Tools.
√ Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair.
√ Maintain tool in good and clean condition for best and safest performance.
√ When not in use, clean tool, and store it in safe, dry, childproof location.
IMPORTANT: This manual is provided as a guide only,refer to the vehicle manufacturer’s service instructions,or a proprietary manual, to establish the current procedure and data. 
■ WARNING! Failure to heed safety and warning instructions may result in damage and/or personal injury and will invalidate the warranty.
■ WARNING! The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator
APPLICATION / SPECIFICATION OF AXLE SOCKET SET FOR IVECO
Chrome Molybdenum drop forged, twelve-point, high impact socket designed for the removal of axle nut fitted to Iveco Eurotech-Cursor. 


 Drive: . . . . . . . . . . . . . . . H36

 Size: . . . . . 110mm, 12-point