#NewProduct: New Type Hydraulic 10 Ton 2/3Jaw Bearing Puller
- Share
- Issue Time
- Nov 21,2023
Summary
New Product arrive: New Type Hydraulic 10 Ton 2/3Jaw Bearing Puller
A bearing puller is used to remove bearings, gears, or pulleys from shafts. A typical bearing puller has a forcing screw that is positioned on the end of the shaft and legs that circle around the back of the bearing. These are referred to as external bearing pullers, but internal pullers are available types too. The application of force can be manual, hydraulic, or pneumatic. Even damaged, worn, or difficult-to-remove bearings are relatively easy to remove thanks to the specially designed claws, which fit around or inside shaft components.
Hydraulic 10 Ton 2 3 Jaw Bearing Puller (New Tools)
Item No:DN-D2030
Safety: very safety for mechanics to repair car suspension system
Type: Hydraulic Bearing Puller
~~~~~~~~~~~~~~~~~~~~~~~
Utility:
Self-centered, easy to convert, 2 or 3 arm puller.
The arms slide inward or outward at the same time.
Safe:
The arm will never deflect!
Economical:
2/3-arm combination puller, the price of 2 pullers is one.
Strong:
The greater the pull, the tighter the jaw grips the object in question! The arm must not be bent or deflected
Item No |
DN-D2030
|
||
Material | Alloy Steel | ||
Hardness |
38-42 HRC
|
||
Suitable |
Remove Bearings
|
||
Size |
3 Sizes To Choose
|
|
Item No
|
Sizes
|
Width of grip externa(min)
|
Width of grip externa(max)
|
effective arm length | max withdrawal force | claw height |
|
DN-D2030-1
|
4'
|
36mm
|
100mm
|
100mm | 7.5mm | |
|
DN-D2030-2
|
6'
|
52mm
|
150mm
|
150mm | 10 | 9.8mm |
|
DN-D2030-3
|
8'
|
75mm
|
200mm
|
200mm | 10 | 13.8mm |