UNIVERSAL INNER BEARING PULLER instruction

Share

Issue Time: Jul 29,2022

Summary

UNIVERSAL INNER BEARING PULLER instruction, from Chinese tool manufacturer-DNT Tools,custom tool

UNIVERSAL INNER BEARING PULLER

INSTRUCTIONS

1. Slacken the chain and place around the bearing.

2. Assemble the puller around the bearing sleeve as shown, lift the chain and tighten around the legs using key provided. With the chain pulling all three of the knife edge feet (1) into the joint below, the bearing starts to move.

3. Turn the force screw with the aid of a spanner. As movement starts and the gap increases

tighten the chain again to bring the legs in fully (2) and then continue drawing off the bearing.